在線詢盤
帶 * 為必填項 關閉
遠圖2.5度電超節能型鋼化爐
基本信息
設備尺寸按客戶實際需求量身定制！
節能效果優越，5mm厚玻璃鋼化，每平米只需2.5度電，一年即能節約電費20萬左右。
適用于生產建筑玻璃、家具玻璃、家電玻璃、汽車玻璃等平板鋼化玻璃的生產；
It is suitable to produce flat tempered glass for architecture, furniture, home appliances, vehicle etc.
可鋼化普通浮法玻璃、超白玻璃、著色玻璃、單面絲印玻璃、壓花玻璃、部分鍍膜玻璃等。
The suitable glass sort including: clear float glass, tinted glass, single side screen printing glass, rolled glass, ultra clear glass, and some series of coated glass.
設備特點：對于生產4mm厚玻璃或更薄玻璃，采用兩個風機的通過式結構；其中一個為高壓風機，另外一個為低壓風機。具有更好的節能效果，產品平整度也能顯著提高。
Special point: Our pass-through type furnace has special advantage when you start from 3mm or 4mm. There are two blowers and two chillers; one big blower for high pressure chiller section, the other one is a small blower for low pressure chiller. This configuration is energy efficiency and makes glass flatness better.
技術參數 Technical parameters:
型號 Model | 較大規格Max.Size (mm) | 較小規格Min.Size (mm) | 厚度范圍 Thickness (mm) | 產量(米2/小時) Productivity (m2/h) | 供電容量KVA Power Capacity |
YTP1506 | 1500×600 | 110×50 | 2.0-10 | 14.4 | ≥100 |
YTP2010 | 2000×1000 | 200×100 | 2.5-12 | 32 | ≥200 |
YTP2412 | 2440×1200 | 250×100 | 2.8-19 | 46.8 | ≥315 |
YTP2515 | 2500×1500 | 300×100 | 2.8-19 | 60 | ≥400 |
YTP3018 | 3000×1800 | 300×100 | 2.8-19 | 86.4 | ≥400 |
YTP3020 | 3000×2000 | 300×100 | 4-19 | 96 | ≥500 |
YTP3620 | 3660×2000 | 300×100 | 4-19 | 115 | ≥630 |
YTP3624 | 3660×2440 | 300×100 | 4-19 | 142 | ≥630 |
YTP4224 | 4220×2440 | 300×100 | 4-19 | 164.7 | ≥800 |
YTP5024 | 5000×2440 | 300×100 | 4-19 | 195.2 | ≥900 |
YTP6024 | 6000×2440 | 350×150 | 4-19 | 234.2 | ≥1100 |
YTP6030 | 6000×3000 | 450×250 | 5-19 | 288 | ≥1380 |
YTP8033 | 8000×3300 | 450×250 | 6-19 | 422.4 | ≥1880 |
注：
除以上所列爐型外，可按客戶實際需求定制不同規格尺寸爐型；
上述產量按5mm白玻，100%裝載率，100%成品率計算。玻璃厚度的增減會引起產量變化；
上述供電容量按4mm厚白玻鋼化時所需要數值計算。